Electric heating magnetic flap level gauge, anti-frost type magnetic flap, jacket type level gauge, suitable for various environments from low temperature to high temperature, vacuum to high pressure, etc. It is an ideal level measurement for petroleum, chemical and other industrial sectors product. According to the different installation positions in the container, there are two types of side mounting and top mounting. According to different working media, three materials are provided: stainless steel, ABS, and PP-R engineering plastics. Among them, ABS and PP-R are suitable for corrosive media such as acids and alkalis. Features: The float is used as the measuring element, and the magnetic steel drive turns the column display without energy. Equipped with upper and lower limit switch output, it can realize remote alarm and limit control. Equipped with a transmitter, it can realize the remote indication, detection and control of the liquid level. Main technical indicators: installation form content side-mounted top-mounted installation spacing (measurement range) stainless steel 500~5000(mm) 500~2500(mm) ABS, PP-R 500~4000(mm) working pressure 0.6, 1.6, 2.5 ,4.0MPa 0.6,1.6,2.5MPa Medium density>0.6g/cm3>0.76g/cm3 Main material 1Cr18Ni9Ti, ABS, PP-R (working pressure 0.6MPa) Medium temperature -40~100℃ (ABS, PP-R: -40~80℃) Ambient temperature -40~+70℃ Indication error ±10mm The medium sticky side-mounted jacketed magnetic flap level gauge is a heat tracing system, suitable for level measurement in antifreeze, heat preservation and heating occasions , Jacket types include steam jacket, water circulation jacket, vacuum jacket, electric jacket and so on. Explosion-proof electric heating system can be realized according to site requirements.